DIN 1.6657 14NiCrMo13-4 16NCD13 832M13 EN36C Specifications
14NiCrMo13-4 datasheet, 1.6657 Chemical,14NiCrMo13-4 properties ssteelmaking,
ESR, blooming, hot forging & rolling, heat treatment, straightened, ultrasonic
test, cold working, machined. We also possess advanced precision machining
equipments for further processing. Material specification - DIN EN 10084 (1998),
DIN 17210 (1986)
TECHNICAL DATA SHEET - DIN 14NiCrMo13-4
MATERIAL CATEGORY: Carburizing structural steel
PRODUCT DESCRIPTION
Proven performance in long-term service.Extensive database of long term, high
temperature test results.High room and elevated temperature strength.Good
creep.High notch tolerance.
Thermal expansion coefficients compatible with low alloy steel turbine casing
materials.Lower design and operating risks
Simplified design for bolting configuration compared with martensitic steels or
high nickel alloys.Alloy structural steel is provided with higher yield
strength, tensile strength, endurance strength, yield ratio (about 0.85
generally ) enough plasticity and toughness.
The concentration of alloy element of this kind of steel is quite high, mainly
are corrosion resistant steel, heat resistant steel, wear resistant steel, and
other special steels of physical and chemical properties. Alloy structural steel
has preferable mechanical property than that of carbon structural steel, high
performance of heat treatment especially.The alloy is usually produced by EAF
/VD /LF followed by electroslag refining (ESR) if necessary for special
purpose.Bars and, where applicable, forgings are subjected to ultrasonic
examination based on the different level according to the buyers'
requirements.Bars are usually supplied bright in the annealed condition, or
bright annealing specially.
Final heat treatment - heat treatment / QT
MATERIAL SPECIFICATIONS
DIN EN 10084 (1998), DIN 17210 (1986)
CHEMICAL COMPOSITION (WEIGHT %)
C (£¥): 0.11 ~ 0.17
Si (£¥): ¡Ü 0.40
Mn (£¥): 0.30 ~ 0.60
P (£¥)¡Ü: 0.035
S (£¥)¡Ü: 0.035
Cr (£¥): 0.80 ~ 1.10
Mo (£¥): 0.10 ~ 0.25
Ni (£¥): 3.00 ~ 3.50
DIN 1.6657 14NiCrMo13-4 16NCD13 832M13 EN36C : 2008 Case hardening steels.
Technical delivery conditions
Classification, Case hardening steels Equivalent grades:
Chemical composition % of the ladle analysis of grade 14NiCrMo13-4 (1.6657)
Elements not quoted in this table shall not be intentionally added to the steel
without the agreement of the purchaser, other than for the purpose of finishing
the heat.
Steels with improved machinability as a result of the addition of lead or higher
sulfur contents, depending on the manufacturing process up to around 0.1 % S,
may be supplied on request. In this case, the upper limit of the manganese
content may be increased by 0.15 %
Product description:
Step Shaft 1.6657 Tube 1.6657 Pie-shaped 1.6657 Ring 1.6657 Module Large valves
of the main 1.6657 Other Profiled forgings 1.6657
Special Steel classification:
Stainless steel, Hi-Steel HSLA-80, Mould steel, Heat resistant steel, Tool
steel, Ball bearing steel,Spring steel, Alloy steel, Construction steel, Die
steel, High-speed steel, angles, channels, H steel, I-beams, welded pipes,
seamless tubes,
Standard:
Our products meet Chinese GB, Japanese JIS, US ASTM, UK BS, EU DIN standards and
so on.
Forging/hot rolling/ extrusion of steel.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Finished goods condition: hot forging/hot rolling + annealing/normalizing +
tempering/quenching + tempering/any conditions based on the customer's
requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine
machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum
consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based
on the customer's requirement
TYPICAL APPLICATIONS
Alloy structural steels are widely used in the filed of ship, vehicle, airplane,
guided missile, weapons, railway, bridges, pressure vessel, machine tools,
mechanical components with a bigger sectional size and so on.
Power generation ¨C turbine fasteners ¨C boiler support rods
Process plant ¨C fasteners
Mechanical gears, gear shaft, main axis, valve rod
Mechanical parts - connecting rod, bolt and nut
Multidiameter shaft
Pressure vessel, seamless pipe
AISI 8620 1,6523 | 21NiCrMo2 | SNCM220 20NiCrMo13-4 1.6660 ASTM 52100 | 1,3505 | 100Cr6 | SUJ2 | EN31 33NiCrMoV14-5 1.6956
AISI 4340 | 36CrNiMo4 | 1,6511 | EN24 | 817M40 | SNCM439 EN DIN 34CrNiMo6 | 1,6582 | 4337 Engineering Steel BS EN 42CrMo4 | 1,7225 Alloy Steel
1,2379 | X153CrMo12 | SKD11 UNS S31254 1.4547 F44 Super Austenitic Stainless Steel DIN 1.6657 14NiCrMo13-4 16NCD13 832M13 EN36C
DIN1.6587 X4317 18CrNiMo7-6 17CrNiMo6 18NCD DIN 1.6566 17NiCrMo6-4 18NiCrMo5 817M17 SAE4317 DIN 1.6657 14NiCrMo13-4 16NCD13 832M13 EN36C